Laboratory gases and accessories

Page:
  1. 1
  2. 2
per page
  1. Compressed gas bottles, 10 l, 200 bar

    With filling, steel and varnishing according to DIN, with valve protection cap and base, with school's name on a label. Dimensions: 855 x 140 mm dia. Unladen mass: approx. 18 kg.

    Kat.-Nr.PurityGas typePaint coatingGas content
    661 010   8 Dangerous good5Hydrogenred2.0 m3
    661 011   8 Dangerous good2,6Oxygenblue2.0 m3
    661 012   8 Dangerous good3Carbon dioxidegray7.5 kg
    661 013   8 Dangerous good5Nitrogengreen2.0 m3
  2. Compressed gas bottles, 2 l

    Kat.-Nr.PurityGas typePaint coatingGas content
    661 0080   4 Dangerous good5Hydrogenred200 bar
    661 0081   4 Dangerous good2,8Oxygenblue200 bar
    661 0082   4 Dangerous good3Carbon dioxidegray1.5 kg
    661 0083Dangerous good2,8Nitrogengreen200 bar
    661 0084   4 Dangerous good4,6Heliumgray200 bar
  3. Trolley

    For 10 l compressed gas bottles with safety chain.

    Kat.-Nr.Designation
    661 019   4 Trolley for one gas canister
    661 020   4 Trolley for two gas canisters
  4. 661021

    LD Table rack for one compressed gas bottle 2 l

    Table rack for one compressed gas bottle 2 l

    Details
  5. 6610186

    LD Tube adapter for pressure reducing valve

    Tube adapter for pressure reducing valve

    Details
  6. Pressure reducing valve

    According to DIN, with 2 manometers, standard thread and glass nipple, fitting compressed gas bottles 661010-014 and 6610080-0086, control range 0 ... 10 bar.

    Kat.-Nr.Gas typefor gas bottles
    661 015   4 Hydrogen661010 / 6610080
    661 016   4 Oxygen661011 / 6610081
    661 017   4 Carbon dioxide, helium, argon661012 / 6610082 / 661014 / 6610084
    661 018   4 Nitrogen661013 / 6610083
  7. Open jaw spanner

    Double-end spanner according to DIN 3110 and ISO3318/1085, chrome plated.

    Kat.-Nr.MeasuresApplication
    664 568   4 18/19 mmfor tube adapter
    664 56930/32 mmfor compressed gas bottles
  8. MINICAN gas can

    Geometrical content: 1 l, 240 mm height, 80 mm exterior diameter, unladen mass approx. 250 g.

    Kat.-Nr.PurityGas typeGas content (based on standard conditions)
    661 0010   4 5Argon12 l
    660 989   4 Dangerous good2,5N-Butane500 g
    661 0011   4 2,5i-Butane450 g
    660 988   4 Dangerous good2,5Ethane14 g
    660 994   4 Dangerous good2,8Ethene13 g
    660 984   4 Dangerous good5Helium12 l
    660 999   4 Dangerous good4,5Carbon dioxide21 g
    660 987   4 Dangerous good3,5Methane12 l
    660 985   4 Dangerous good4,5Neon12 l
    660 998   4 Dangerous good4,5Oxygen12 l
    661 000   4 Dangerous good5Nitrogen12 l
    660 997   4 Dangerous good5Hydrogen12 l
  9. Fine regulating valves MINICAN gas cans

    With 4 mm glass nipple.

    Kat.-Nr.Designation
    660 980   4 Fine regulating valve for minican gas canisters
    660 9801Fine regulating valve for Minican gas canisters with manometer
  10. 604481

    LD Rubber tubing, 1 m x 4 mm diam., DIN 12865

    Rubber tubing, 1 m x 4 mm diam., DIN 12865

    Details
Page:
  1. 1
  2. 2
per page

Dangerous good This product is a dangerous good and is not available for online purchase. If this product is part of an experiment, you may order the experiment without the marked dangerous good. For ordering the dangerous goods please contact our customer service center (+49 (0) 22 33 / 604 – 319).

Print page

Contact Us

Customer Centre:
Technical Service-Hotline:
Local contact - Feedback Instruments Limited:
Click here for our Contact Form or Postal address.

Contact Us