Light-controlled transistor I, light barrier

LP4.1.4.4

To carry out all experiments from this subject area, we offer you a complete set: CLICK HERE

Description

In this experiment, the students set up a light barrier. Using the voltage drop at a photo resistor, a transistor is controlled which functions as a switch. In a second setup, a relay is added to the experiment to make it possible to switch the relay instead of the lamp directly.

Components of equipment sets

1	57867 4	Transistor BD 137, NPN, e.b., STE 4/50
1	57921 4	Relay with change-over switch STE 4/50
1	57681 4	Plug-in board safety socket, 20/10
2	57681 4	Plug-in board safety socket, 20/10
1	57732 4	Resistor 100 Ohm, STE 2/19
1	57744 4	Resistor 1 kOhm, STE 2/19
1	57756 4	Resistor 10 kOhm, STE 2/19
1	57782 8	Variable resistor 47 kOhm, STE 2/19
2	57905 8	Lamp holder E10, lateral, STE 2/19
1	57913 8	Toggle switch STE 2/19
1	57802 4	Photoresistor LDR 05, STE 2/19
1	50148 4	Bridging plugs STE 2/19, set of 10
2	500621 4	Safety experiment cable, 50 cm, red
2	500622 4	Safety experiment cable, 50 cm, blue
1	521488	AC/DC power supply 0...12 V/3 A
1	50507 4	Bulbs 4 V/0,04 A/0,16 W, E10, set of 10
1	50506 4	Bulbs 3,7 V/0,3 A/1,11 W, E10, set of 10

Print page

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe

For European distributors, please visit: European distributors

Worldwide requests

Light-controlled transistor I, light barrier

Description

Components of equipment sets

Contact Us